Getting Advice On Wise Strategies In 6G Welding

There are numerous varieties of welding techniques used today and probably the most complicated and challenging ones is 6G pipe welding. This welding technique typically involves joining cylindrical metal tubes utilizing a shielded metal arc welding technique or even a gas shielded arc welder. There are lots of challenging methods to learn to become a professional welder and 6G welding is the most complex and difficult to learn (keep in mind: you have the ability to read more over at this).

To be a professional and proficient welder, one needs to are able to tackle different tasks and anticipate to become acquainted with a variety of materials in numerous thicknesses. There are numerous challenges relevant to 6G pipe welding with all the main ones relating to the positions you have to be in for you to get the task done and also the skills you should master the welding techniques needed that you can attain the greatest results. Fortunately, individuals who excel at 6G welding generally earn over welders who are proficient at simpler welding techniques. And that’s since the 6G welding approach is quite difficult to perfect.

What’s 6G Welding?

The “G” in 6G signifies the weld type, and that is a groove weld as the “6” refers to the position of the welded pipes. Groove welds are joints that join two metal tubes where the space between the two is loaded with welding material.

A frequent welding process that’s used when welding pipes is open root welding. With this particular technique, the welding joint doesn’t use a tacked backing plate. This procedure can be a bit tough to master since the weld has been made across a gap. To avoid making mistakes and messing the job, welders must employ the correct welding techniques.

One important thing that complicates pipe welding is the fact getting around the pipe to access the gap will most likely signify you block your view with one of both hands eventually. Besides that, it’s a welding technique that may expect you to use both hands to get the job done. Consequently, it’s crucial for you to take time to find out which of the sides is the good side and the bad one when it comes to pipe welding – and that’s correlated to whether you’re left-handed or right-handed.

Taking care of the left-hand side of your tube will likely be challenging for right-handed people, and vice-versa. Identifying this obstacle early will allow you to learn ways to overcome it to ensure that you don’t ruin your welds.

Coping with Pipe Welding Positions

Becoming skilled at while using right positions will ensure you always obtain the best results when pipe welding. The machine of letters and numbers you see on pipes is a sort of code that indicates the level of joint and position you have to use.

You can find four welding positions and they are 1G, 2G, 5G, and 6G.

The 1G position can be a flat welding position that’s not used frequently. Though it’s still imperative that you learn it as being a welder. 1G welding is actually flat-welding since the tube is lying on the curved edge (on its side) and might be rotated during welding.

The 2G position, on the flip side, is fixed – the pipe being welded can’t be turned. However, because it is placed on its base, welding the pipe becomes simpler since it is stabler and sturdier.

Just like the 1G position, 5G position means the pipe is horizontal but can’t be moved as it’s fixed set up. In cases like this, you’ll have to weld the pope in different positions, including overhead. Other positions used in combination with this position include vertical down and vertical up.

One of the most challenging welding position is the 6G welding position. That’s since the pipe being welded is in a 45-degree angle. 6G welding will expect you to pay very close awareness of both your bad and good side since welding without blocking your view with one of both hands is virtually impossible.

Whenever you see the letter “R” in welding codes, which means that the welding position can be a restricted one – and that’s either visually or physically.

The 6G Welding Position

One of the things that complicate 6G welding is the fact that since the welds are vertical, molten filling metal is likely to flow downward to the joint cavity during welding. To avert this, you should practice a whole lot. Also, considering both pipes are horizontal to each other with one tube positioned at the 45O angle for the other, discovering the right position like a welder can be challenging. With this particular welding technique, there are actually yourself the need to use different body positions and other skills to perform your goal.

6G Welds: Just what are They User For?

Groove welds are employed on a variety of joints except lap joints (i.e., joints manufactured from overlapping tubes.) While it’s rare for certified welders to encounter pipes that need a 6G weld in their career, the welding position is normally used like a pre-employment test.

The 6G Welding Test

Also known as the Arkansas Bellhole Tests, the 6G welding test is used to weigh the abilities of the welder. The test is very stringent since the welder has to use various welding techniques (horizontal, vertical, and flat welding) to achieve a 6G weld. These welds are typically manufactured by welders in trades such as steel working, which require skilled welding abilities. When a welder could make good 6G welds, they can be tested onto it and obtain certified once they pass the test.

6G Welding Certification

Those trying to become certified pipe welders have to move through a, somewhat, demanding process as they need to prove they are not merely good with welding machines but they also can produce quality penetration and can be employed in restricted spaces with restricted views. Besides that, a prospective welder need to pass an exam regarding their all-position welding technique.

You will learn more regarding the 6G welding certification right here:

To obtain a 6G certification, you will need to attend an excellent welding school, which can be costly and time-consuming. However, in the end, you’ll have gained extra skills that boost your career like a welder.

6G pipe welding is among the toughest weld certifications tests a welder can pass since the pipe is immovable as well as a 45-degree angle. In becoming 6G certified, you must prove you could weld pipes in all positions – overhead, horizontal, and vertical – so you are proficient at welding with both hands.

Certification Sources

In The USA, 6G certification is provided through the American Welding Society jointly with a number of other organizations that offer certification tests. The American Welding Society lists over 80 accredited weld testing institutions where applicants may take 6G certification tests. The Society’s certification application features a weld testing section that needs to be completed by among its Accredited Testing Facilities.

Some 6G pipe welder certification providers in America offer training to aid welders pass their certification test. As an example, AVTEC offers certification as soon as a welder has completed its 75 events of training and 450 hours welding degree program. Industrial Training Solutions, on the flip side, sponsors a 6G welder certification that involves 120-hours of hands-on welding instructions when preparing to the welding certification exam.

Costs and Requirements

Each welder’s certification program requires its applicants to satisfy specific requirements. As an example, some facilities, like Industrial Training Solutions, will demand their applicants to get some years of welding experience (two years in this instance) before they can go into the program. Others will demand that you simply hold, at a minimum, a 3G welding certification.

It’s worth noting that the fee for acquiring 6G pipe welding certification varies dependent upon the institution offering the certification. The AWS charges about $35 for every certification, while the fee for tests are catered for by applicants. Most programs cost around $4,000 to $5,000 – and that includes testing and training.

Simply How Much Do 6G Welders Make?

The standard hourly rate for 6G welders in the United States is $24.91/hour though this could be able to as much as $40/hour or as little as $17/hour, for the way experienced and skilled a welder is and also the state they reside. A seasoned 6G welder can earn around $98k/year (this includes commissions, bonuses, and profit-sharing) if they are efficient at their work and benefit a major company.


Mastering the skill of pipe welding may take your work to great heights. However, it means learning many of the most complicated and challenging welding skills and techniques within the welding industry. However, if you put in the effort and pass the certifications, you will possess gained a very-prized skillset that is certainly preferred by some of the top employers within the metalworks industry. While 6G welding doesn’t require any special or extra equipment, it’s a welding method that is not to the half-hearted. If you are considering transforming into a professional and reputable 6G welder, find a good welding school, make the effort, and acquire a 6G welding certification. While it will likely be the most significant challenge you might have ever faced, finding out how to professionally 6G pipe weld improves your chances of transforming into a much sought-after professional welder.